Sasquatch Exchange
TRADE
OrdersSupportAffiliatePrivate Swap

Swap USDT on Hyperliquid (HyperEVM) to DAI on Linea

FromHyperliquid
ToLinea
ENTER AMOUNT
Squatch Guard
Before a deposit order moves forward, Squatch Guard checks the amount, asset, network, and active quote window against the order details.

What you need to know

USDT and DAI: two stablecoin ledgers

USDT is issued through ERC-20, TRC-20, SPL, and other network-specific contracts. The ticker does not determine the token standard, contract, issuer controls, or destination address model. DAI is a crypto-backed dollar-oriented stablecoin whose canonical and bridged contracts vary by network. Its peg design does not make two network representations interchangeable. The route changes both asset identity and network representation; dollar-oriented pricing does not remove issuer controls, liquidity spread, contract, or receiving-network checks.

USDT input identity and handling

Tether is classified as a stablecoin for this route. USDT uses a network-specific contract asset on Hyperliquid (HyperEVM). The recorded Hyperliquid (HyperEVM) representation uses 18 decimal places. The input must match the selected ERC-20, TRC-20, SPL, or other USDT representation; each standard has different address, approval, and fee behavior.

DAI output identity and receiving

Dai is classified as a stablecoin for this route. DAI uses a network-specific contract asset on Linea. The recorded Linea representation uses 18 decimal places. The receiving wallet must recognize the exact destination DAI contract. Peg intent does not guarantee that a bridged representation has the same liquidity or issuer path.

From Hyperliquid (HyperEVM) L1 into Linea L2

Hyperliquid (HyperEVM) source execution occurs on L1, while Linea delivery occurs on a separate L2 ledger that settles to ethereum. HYPE pays source gas and ETH is the destination gas asset; identical-looking wallet addresses do not merge the balances or transaction histories.

Hyperliquid (HyperEVM) source execution

Hyperliquid (HyperEVM) is a L1 EVM network in the Hyperliquid ecosystem. HYPE pays source-side network gas on Hyperliquid (HyperEVM). EVM 0x account address; confirm the destination is HyperEVM A HyperEVM source spends HYPE for EVM gas; HyperCore balances, vault positions, and other Hyperliquid account states are not interchangeable inputs.

Linea destination execution

Linea is a L2 EVM network in the Ethereum ecosystem. ETH pays destination-side network gas on Linea. EVM 0x account address A Linea receipt is recorded on the zkEVM L2 before the related proof settles to Ethereum; later activity needs ETH on Linea and the Linea token contract.

Mistakes specific to USDT Hyperliquid (HyperEVM) to DAI Linea

Route-specific mistakes include sending on a network other than Hyperliquid (HyperEVM); using a destination that is not valid for Linea; running out of HYPE before the source transaction is submitted; selecting a stablecoin by ticker without checking its network contract. A HyperEVM source spends HYPE for EVM gas; HyperCore balances, vault positions, and other Hyperliquid account states are not interchangeable inputs. The input must match the selected ERC-20, TRC-20, SPL, or other USDT representation; each standard has different address, approval, and fee behavior. A Linea receipt is recorded on the zkEVM L2 before the related proof settles to Ethereum; later activity needs ETH on Linea and the Linea token contract. The receiving wallet must recognize the exact destination DAI contract. Peg intent does not guarantee that a bridged representation has the same liquidity or issuer path.

Private Route for USDT → DAI

Hyperliquid (HyperEVM) wallet, token-transfer, contract, log, and gas activity remain public, and Linea wallet, token-transfer, contract, log, and gas activity remain public. For this USDT on Hyperliquid (HyperEVM) to DAI on Linea path, Private Route is intended to reduce the direct visible relationship between activity around the source-side EVM 0x account address; confirm the destination is HyperEVM and destination-side EVM 0x account address; it does not hide either chain's public records.

  • ✓Reduces the obvious link between the USDT deposit and DAI receipt
  • ✓Compare standard and Private Route options for Hyperliquid (HyperEVM) → Linea
  • ✓Shows what remains public on Hyperliquid (HyperEVM) and Linea before you deposit
Check Private Route availability →

Related routes

No-KYC and verification rulesPrivate USDT to DAI route explainerPrivacy limits and live availabilitySwap DAI to USDTReverse routeTether (USDT)Dai (DAI)Hyperliquid (HyperEVM) networkLinea networkBrowse supported swap routes

Swap USDT on Hyperliquid (HyperEVM) to DAI on Linea FAQs

What exactly leaves Hyperliquid (HyperEVM) as USDT?

USDT is a contract representation on Hyperliquid (HyperEVM) with 18 decimals at 0xD948F78d3316228aF5DfE2576A64Fd822CE08888. HYPE, not USDT, pays gas unless both symbols are the same. A HyperEVM source spends HYPE for EVM gas; HyperCore balances, vault positions, and other Hyperliquid account states are not interchangeable inputs. The input must match the selected ERC-20, TRC-20, SPL, or other USDT representation; each standard has different address, approval, and fee behavior.

What exactly arrives on Linea as DAI?

DAI is a contract representation on Linea with 18 decimals at 0x4AF15ec2A0BD43Db75dd04E62FAA3B8EF36b00d5. ETH, not DAI, pays gas unless both symbols are the same. A Linea receipt is recorded on the zkEVM L2 before the related proof settles to Ethereum; later activity needs ETH on Linea and the Linea token contract. The receiving wallet must recognize the exact destination DAI contract. Peg intent does not guarantee that a bridged representation has the same liquidity or issuer path.

Why does the USDT to DAI direction matter?

The input must match the selected ERC-20, TRC-20, SPL, or other USDT representation; each standard has different address, approval, and fee behavior. On receipt, The receiving wallet must recognize the exact destination DAI contract. Peg intent does not guarantee that a bridged representation has the same liquidity or issuer path.

What changes between the source and destination asset roles?

USDT is the deposited stablecoin input; DAI is the quoted stablecoin output. Source allowance or native-spend rules and destination wallet/representation checks are evaluated separately.

What should be matched before sending USDT?

The input must match the selected ERC-20, TRC-20, SPL, or other USDT representation; each standard has different address, approval, and fee behavior. A HyperEVM source spends HYPE for EVM gas; HyperCore balances, vault positions, and other Hyperliquid account states are not interchangeable inputs. A Linea receipt is recorded on the zkEVM L2 before the related proof settles to Ethereum; later activity needs ETH on Linea and the Linea token contract. The receiving wallet must recognize the exact destination DAI contract. Peg intent does not guarantee that a bridged representation has the same liquidity or issuer path.

Which stablecoin contract must this route match?

USDT must match its Hyperliquid (HyperEVM) representation. DAI must match the quoted Linea representation. A ticker or target price is not enough to identify a token contract.

What funds the Hyperliquid (HyperEVM) source transaction?

HYPE is the native gas asset for Hyperliquid (HyperEVM). A HyperEVM source spends HYPE for EVM gas; HyperCore balances, vault positions, and other Hyperliquid account states are not interchangeable inputs. USDT is token-tracked and can need approval before transfer.

Can I swap USDT on Hyperliquid to DAI on Linea without KYC?

Requirements are checked for the live USDT Hyperliquid to DAI Linea quote. Verification requirements can depend on the provider, amount, jurisdiction, and current route. Sasquatch does not verify this route as universally no-KYC; check the live flow before continuing.

View all Help Center FAQs →